banner



Home  ›  How To Repair Holes In Wall From Tv Mount

How To Repair Holes In Wall From Tv Mount

Written By Friday, June 17, 2022 Add Comment Edit

Download Article

Download Commodity

Idiot box mounts exercise such a good job of securing your TV that undoing them looks more challenging than it is. Although you can contact a professional, you are capable of doing it yourself with few problems. Wall mounts consist of two parts attached together and sometimes secured past a lock. By removing these components, you'll be able to lift your TV gratis and go information technology to where it needs to get.

  1. i

    Unplug all cords attached to the TV. It's easy to trip over cords, then take care of them before moving your precious TV. Pull the power cable out from the wall and don't forget whatever attachments. Video game console cables, movie players, and other accessories must all go, and you should movement them to the other side of the room just in case.[1]

  2. 2

    Disengage any safety locks. Many TV mounts don't have locks. If yours does, it could be whatsoever number of lock types. Have your owner'south manual on mitt so you don't curse having anti-theft protection inside your own abode. Search the mount for whatever signs of the lock. Some locks require a special key that came in the packaging, while others have flip tabs or sliding bars to undo with your fingers.[2]

    Advertisement

  3. iii

    Elevator up the bottom of the Tv if possible. Grasp the TV past the sides and try to edge the bottom forwards. The Goggle box is hooked to the top of the mount, so don't worry. Information technology won't topple over on you. Instead, you'll be able to encounter the back of the Idiot box and achieve your manus behind it. If the TV doesn't budge, don't force information technology.

    • A TV that doesn't move either has safety locks or is held by screws.

  4. 4

    Locate the screws or pull strings. Depending on the mount y'all take, screws or strings secure the TV to the bracket on the wall. The proficient news is that neither are complicated to find and disengage. With the bottom of the Idiot box tilted forwards, you won't have any trouble seeing these components. If you don't see any strings hanging from the mountain'due south sides, yous'll know you lot need a screwdriver right away.

    • If you lot have the installation instructions for your TV mount, apply those—simply reverse the steps.[iii]

    5. Advertisement

  1. 1

    Unscrew the mount pieces. Unlike sizes of TV utilise unlike screws, so you lot may need to do some trial and error hither. An adjustable electrical screwdriver cuts out some of the hassle. You'll have to contort your hand to get the screwdriver backside the TV. The fasteners will be under the mount or on its sides, depending on the model.[4]

    • It's a good idea to have someone assist you agree the TV equally yous do this.[five]

  2. 2

    Pull on the mount strings. Mounts that have strings also feature a spring lock in the mount. When you pull the strings, heed for the sound of the lock disengaging. You demand to prevent the lock from activating. While you can reach both strings past yourself, get someone else's help to make it easier.[6]

  3. iii

    Lightly dissever the Tv from the wall. If you don't have someone to hold the TV out from the wall, you'll accept to improvise with household objects. All you lot need is a pocket-sized amount of separation to prevent the lock from engaging. Pull the string on one side and move the side away from the wall. Stuff the wedge objects behind the Television and allow go. If done correct, you won't hear the lock engage once again, so repeat this with the other side.[7]

    • Movie and video game cases make for bully makeshift wedges, but you can apply any you have on hand.

  4. four

    Lift the Boob tube off the mountain. The final restraint is the meridian part of the mount. Get someone else'south help to lift the TV. Accept each person take up one of the ends. Count to iii and enhance the Tv over the mount. Information technology'll come up right off and y'all can rest it on the footing.

    5. Advertising

  1. 1

    Identify the Goggle box face-down. Move your TV until it is condom on the ground. Clear off a flat spot for it and lay it a clean, padded surface. Exercise not touch the TV screen or balance the screen confronting a surface. It would exist a shame to get this far only to scratch up the screen.[viii]

    • Exist sure to clear your whole path and so there'due south not anything yous could trip over.[9]

  2. 2

    Unscrew the mount slice on the TV. You've managed to dismount and protect your TV so far, but part of the mount remains fastened to it. Fortunately, this office is way easier than getting the TV down. No matter the shape of the mountain piece, information technology'll be attached past four screws.[x]

  3. 3

    Unscrew the mount piece on the wall. Without the TV, the other mount piece is an empty frame on your wall. If you cull to remove it, undo it the same way you did the rest of the mount. These screws shouldn't provide much resistance, then undo them and sideslip the mount piece off the wall.

    4. Advertisement

Add together New Question

  • Question

    How do you lot release a Goggle box mount?

    Gino Colucci

    Gino Colucci is a Domicile Improvement Specialist and the Owner of Crackerjacks Handyman Services (not a licensed contractor) in Chandler, Arizona. Crackerjacks Handyman Services offers an effective cost-saving solution for commercial and residential repair and maintenance needs, specializing in smaller projects. Crackerjacks Handyman Services carries liability insurance and all technicians go through a background cheque.

    Gino Colucci

    Home Comeback Specialist

    Expert Respond

  • Question

    How exercise I take my Telly off the mount without dissentious it?

    Gino Colucci

    Gino Colucci is a Habitation Comeback Specialist and the Owner of Crackerjacks Handyman Services (not a licensed contractor) in Chandler, Arizona. Crackerjacks Handyman Services offers an effective price-saving solution for commercial and residential repair and maintenance needs, specializing in smaller projects. Crackerjacks Handyman Services carries liability insurance and all technicians become through a background check.

    Gino Colucci

    Home Improvement Specialist

    Expert Answer

    Support wikiHow by unlocking this expert respond.

    Make sure the TV is unplugged and all the connections are removed before y'all unmount it. Also, clear your path of travel, eliminating all possible trip hazards. Have someone help you lot hold the TV in place while you're unfastening information technology, then place the Television receiver on a padded surface when information technology's removed. Do not touch the screen or rest the screen against a surface.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

Things You'll Need

  • Screwdriver
  • Household items for wedging
  • Clean sheet

Near This Article

Cheers to all authors for creating a page that has been read 181,950 times.

Is this article upwards to date?

Source: https://www.wikihow.com/Unmount-a-TV

0 Response to "How To Repair Holes In Wall From Tv Mount"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel